金属材料相图计算与材料性能模拟软件 JMatPro 新版本V10.0 正式发布。JMatPro是一款能够计算多种合金材料性能的模拟软件，尤其适用于多组分合金。使用JMatPro可以设计合金成分、开发新合金、改进热处理工艺与CAE软件（ProCast、MagmaSolft、Deform、Forge、ANSYS、MSC、等）一起进行工艺流程设计。

1. Addition of calculation of C diffusion in welds

  焊接计算新增C扩散计算功能

2.Addition of dissimilar metal welds for Ni alloys

  Ni合金计算新增金属焊缝浓度计算功能

3. Remodeled simultaneous precipitation in steels including second stage option

  优化了通用钢连续析出计算模型，允许考虑第二个艺程

4.Addition of ALN,MN and M(C,N) isothermal and TTP calculations for steels

 通用钢模块加入AlN,MN和M(C,N)的TTP计算以及等温计算功能

5.Addition of high temperature strength calculation for Single Crystals

 Ni单晶模块加入了高温强度计算功能

6.New model for the calculation of electrical conductivity/resistivity

 电导率/电阻率计算引入了新的模型

7.Addition of calculation of hardening phases in Mg alloys

 Mg合金模块引入强化相计算功能

8.Addition of TTT/CCT and isothermal calculations for Mg alloys

 Mg合金计算模块新增TTT/CCT计算功能

9.New kinetic modelling for Al alloys (TTT/CCT and isothermal calculations)

 Al合金TTT/CCT和等温计算功能引入了新的动力学模型

10.Addition of user defined pearlite-ferrite mixture option in Cast Iron solidification

  铸铁凝固计算材料类型新增珠光体-铁素体混合选项，同时允许用户自定义石墨相占比

11.Extended Single Crystal anisotropy calculation into mushy zone

  将单晶各向异性计算扩展到糊状区

12. Addition of ratio input for calibration of General Steels TTT/CCT (rather than just times at nose)

  通用钢TTT/CCT曲线校准在原有鼻尖温度的基础上扩展支持各相比率校准

13.Addition of a plot option for user defined cooling/heating/... Profiles

  用户定义的冷却/加热曲线添加的额外的绘图选项

14.Addition of info about grain boundaries in Ni alloys strength calculation

  Ni合金强度计算包含额外的晶界信息

15.Addition of surface tension to general steel solidification calculations

  通用钢凝固计算可可得到表面张力信息

16.Addition of temperature/concentration stepping calculation when selecting a point in an isopleth calculation

  等成分面计算结果中点击相图上任意一点可以直接进入温度或浓度步进计算

17.Adjusted antiphase boundary energy calculation in calculation of Ni alloys creep/high temperature strength

  调整了Ni合金蠕变和高温强度计算过程反相畴界能计算模型

18.Remodeled elongation calculation

  优化了延伸率计算模型

1.Update of Fe thermodynamic database: Fe(Ni,Al) CU and ETA phases re-assessed - new OMEGA phase

 更新了Fe合金热力学数据库：重新估定Fe(Ni,Al) CU和ETA相，新增OMEGA相

2.Update of Al thermodynamic database: Ti added to E_ALCRMGMN phase

 更新了Al合金数据库：E_ALCRMGMN相中加入了Ti元素

3.Update of Cu thermodynamic database: new phase M5SI3

 更新了Cu合金数据库：加入了M5SI3相

4.Update of Mg thermodynamic database: new element: Ag - new phases Mg4Ag, Mg7RE (rare-earth) - MgCu2 renamed to Mg(Cu,Zn)2 - extension of rare-earth containing phases to more rare-earth elements

 更新了Mg合金数据库：加入了Ag元素，加入Mg4Ag, Mg7RE (稀土相)，MgCu2重命名为Mg(Cu,Zn)2相，扩展了包含稀土元素的中间相

1.New export to ProCast (xml file)

 新增导出ProCast xml格式结果

2.New export to LVMFlow

 新增导出LVMFlow软件

3.New export to QForm Heat Treatment

 新增导出QForm热处理结果

4.Extended export to Transvalor software

 扩展了Transvalor软件导出功能

5.Extended export to Simufact software

 扩展了Simufact软件导出功能

6.Addition of partition coefficients for steel solidification in Magmasoft export

 通用钢凝固导出到Magma的结果文件中新增了分配系数结果